horiba OCMA-500, Инструкция по эксплуатации, Страница: 98 / 141

Setting
78

Confirm Save
Use this screen to set whether saving of settled measured values to internal memory takes
place automatically or by manual selection.
Fig. 84 Confirm Save screen
The following settings are available. The default setting is "AUTO".
For the buttons and functions, which can be used with this screen appearing, refer to Table 2
(page 16).

Save Memo
Use this screen to set whether a memo indicating the measurement conditions or other
information is saved together with the measured values, if measurement data is saved.
Fig. 85 Save Memo screen
The following settings are available. The default setting is "OFF".
For the buttons and functions, which can be used with this screen appearing, refer to Table 2
(page 16).
Selection Description
AUTO Saving of settled measured values to internal memory takes place automatically.
MANUAL
After a measured value is settled, a message appears to let you select whether the values are saved
to internal memory.
Selection Description
OFF If measurement data is saved, only measured values are saved.
ON
If measurement data is saved, a memo indicating measurement conditions or other information is
saved together with the measured values.