manualshive.com logo in svg

Horiba Scientific DS-72G, Инструкция по эксплуатации

Поделиться
Скачать
Horiba Scientific DS-72G Скачать руководство пользователя страница 96

 

76

9.5 Copy all meas. Data 

Before copying data, make sure that sufficient capacity is available in the USB memory.

If the copy stops in the middle, turn OFF the power and reboot the instrument, and then 

execute the copy again.

9.6 Delete all meas. Data

1.

Tap 

 on the right of the Copy all meas. Data.

2.

Tap 

 to copy the all measurement data. To 

cancel the operation, tap 

.

3.

Tap 

 in the Copy all meas. Data completion 

screen.

1.

Tap 

 on the right of the Delete all meas. Data

2.

Tap 

 to delete the all measurement data. To 

cancel the operation, tap 

.

3.

Tap 

 in the Delete all meas. DATA screen.

You can save the copy of the measurement data 
saved in the instrument into a USB memory. To 
execute the copy, connect a USB memory to the 
instrument.

You can delete all measurement data saved in 
the instrument.

Содержание DS-72G











































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды