manualshive.com logo in svg

Horiba Scientific DS-72G, Инструкция по эксплуатации

Поделиться
Скачать
Horiba Scientific DS-72G Скачать руководство пользователя страница 81

61

7.1.1 Shift to Pharmacopeia Mode

7.1.2 Measured by USP (Stage 1)

1.

Tap 

 and tap "Application".

2.

Tap 

 on the right of the COND pharmacopeia 

mode item and select a desired Pharmacopoeia 
from USP, EP, JP, and CP (PPRC).

1.

Select the USP in the COND pharmacopeia 
mode screen.

2.

Tap 

 on the right of the Stage 1 item.

3.

Before measurement, set the temperature 
conversion to OFF in accordance with the 
regulation prescribed by USP, and the setting of 
the unit is automatically changed to S/cm. 
The changed settings are applied.

4.

Tap 

 to proceed to next the procedure.

5.

Immerse the COND electrode in sample solution 
and tap 

 to start the measurement.

When measurement is completed, the conduc-
tivity of the sample solution and the measure-
ment condition are displayed as a measurement 
result.

Tap 

 to return to the COND pharmaco-

peia mode screen.

Evaluation is conducted based on the "7.1.10 
Temperature and Conductivity Requirements" 
(P.69). 
If the measured temperature is between the 
indicated temperatures, the value at 
temperature lower than the measured 
temperature is applied as the permissible 
conductivity.

Содержание DS-72G











































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды