Horiba Scientific 6561S-10C, Инструкция по эксплуатации

Страница: 24 / 89

12
F
illing with internal solution
Be sure to fill the electrode with internal solution as
described in the following procedure before use.
1
Remove the protective cap.
(Except when it is already removed,
such as first time of use.)

Be sure to fill with internal solution before
use.
If measurement is performed in the state in
which there is not much internal solution,
an inflow of sample solution into the
electrode will result in accurate
measurements no longer being possible.

Use the internal solution included in the
package or available as a consumable sold
separately by HORIBA Advanced Techno.
(
“Consumables” (page 76))

Discharge the internal solution each time
measurement finishes.
View video View video
Note Note
Internal solution Dropper
Items to be prepared
Protective cap