Hopkins 594810, Инструкция по эксплуатации

Страница: 23 / 32

3) The pulse rate accuracy as follows covers the entire pulse rate
display range of 30~250bmp and spo2 range of 70~100%.
The results above suggest that the SPO2 accuracy is within ±2% in range
70-100% and the pulse rate accuracy is less than ±3 in range 25~250
bpm, which meets the requirements of ISO80601-2-61.
7 Maintenance
7.1 Cleaning
！
WARNING: Do not spray, pour, or spill any liquid on the 594810, its
accessories, connectors, switches, or openings in the chassis as this
may damage the pulse oximeter.
For surface-cleaning and disinfecting follow your institution's procedures
or use the steps outlined below:
To surface clean the monitor:
1) Obtain a soft cloth.
2) Dampen the cloth with either a commercial, non-abrasive cleaner or
a solution of 70% alcohol in water.
3) Lightly wipe each exterior surface using the dampened soft cloth.
To disinfect the monitor:
1) Saturate a soft cloth or wipe of hospital grade disinfectant (PDI,
Cavicide, Sanizide, etc).
2) Lightly wipe each exterior surface using the saturated soft cloth.
**Adhere to disinfectant manufacturer guidelines for efficacy and dry time**
！
Caution: Before attempting to clean a SpO2 sensor, read the directions
for use enclosed with the sensor. Each sensor model has specific
cleaning instructions.
7.2 Safety Checks
Before first use, or at least every two years, a thorough inspection should
be performed by qualified service personnel to ensure the reliability.
Follow these guidelines when inspecting the equipment:
Make sure that the environment and power supply meet the requirements.
Inspect the equipment and its accessories for mechanical damage.
Inspect all sensor cables for damage, and make sure that their insulation
is in good condition.
Make sure that only specified accessories are used.
Pulse
Oximeter
Sensor
Arms of each level Spo2
25-250
77%
– 70%
594810 Adult 1.20 1.17
Arms
84%
– 78%
1.00
92%
– 85%
0.67
97%
– 92%
1.33
100%
– 97%
1.83
-23-