5
paper bag
Align opening in paper bag with dirt
tube (S) inside bag compartment.
Push paper bag firmly onto tube.
Tuck top and bottom of paper bag
into bag compartment.
To replace bag door, insert the 2 tabs
on bottom of bag door into the 2 slots
on bag compartment.
Make sure all edges of paper bag
are completely inside the bag
compartment.
Close door.
Pull switch lock (U) above ON/OFF
switch (V) straight out.
Dispose of lock.
Note: If lock
off during
assembly make sure switch is in
the OFF position (down) before
plugging cord into electrical
outlet.
Step 6 Position tools
Raise handle to upright position.
Bring hose toward front of cleaner
and stretch hose over hose rack.
Push opposite hose end
firmly
into
rear “cup“ in rack.
Note:
Hose end must be firmly
connected to tool rack when
cleaning floors.
Position
smaller diameter
end down, at
side
of cleaner as
shown.
Open tool cover.
An
extra belt*
(AA) and
one extra
Position
dusting brush (X),
paper bag* (BB)
can be stored on
furniture nozzle (Y), and crevice
the back of the cleaner handle as
tool
(Z), into
tool storage area
shown.
CAUTION: When cleaner is turned
on, the agitator will continue to
rotate when cleaner handle is in
upright position. Avoid tipping
cleaner or setting it on furniture,
fringed area rugs, or carpeted
stairs during tool use.
Fill out and return the product
registration card included with
your cleaner.
as shown.
*some models
6
