background image

CHaNgINg THE BELT OR BRUSHES

CLEaRINg a BLOCKagE

IMPORTaNT:

 Switch the cleaner off and 

remove the plug from the electricity supply 
before attempting any maintenance.

IMPORTaNT:

 Switch the cleaner off and 

remove the plug from the electricity supply 
before attempting any maintenance.

If your cleaner is not picking up efficiently, the belt or brushes (or both) may need replacing, but first 

please make sure you have:

• Emptied the bin

• Cleaned the filters

• Checked for blockages

Turn the cleaner over and remove 6 
retaining screws attaching the brush guard 
to the base.

Remove the brush guard

Hold the brush assembly and stretch the 
belt until the brush can be slotted back 
into the cleaner housing.

Rotate the brush to ensure free movement 
of the belt.

Refit the brush guard with 6 retaining screws.

1

4

2

3

5

6

Check the cleaning 
tools and hose for 
blockages.

The hose can be 
removed at both ends.

Turn the cleaner 
over and rotate the 
brushes to identify 
any obstructions 
including hair.

Check for a blockage in 
the hose socket. Use a 
flexible rod to remove 
any obstruction.

To clear a blockage
in the Pet Hair &
Allergen Remover*, twist 
the collar at the rear and 
lift the cover.

- 7 -

*Certain models only

Remove brush assembly and check for 
wear on the belt. 
Loop the new belt around the 
motor and brush channel.

gB

Содержание ONEFI VR81OF01










Отзывы: