Hoover ONEFI VR81OF01, Инструкция пользователя

Страница: 4 / 9

PREPaRINg YOUR CLEaNER
WIFI SETUP
SUPPLY CORD
Insert the main handle in the cleaner body.
You can switch the WiFi On/Off
by pressing the WiFi button as
shown in the diagram. The LED
light will continuously flashing
until the vacuum cleaner
is connected to the Hoover
Wizard App.
1. You can download the
Hoover Wizard Application by
scanning the QR code located
on the cover of this manual.
2. Install it on your smart phone.
3. Following the instructions in the App to setup your
vacuum cleaner.
When installed correctly, your smart phone will
connect automatically.
RESET WIFI
You can reset your vacuum cleaner by pressing the
WIFI button for 5s until the LED light start flashing. You
need to reconnect the vacuum cleaner and APP again.
Please refer to the WIFI SETUP -3.
Do not run over the supply cord.
Clip the supply cord in the cord clip
at the back of the handle to avoid
accidentally running the cleaner over the
cord and causing any damage.
Assemble the mini turbo brush holder to the
cleaner,then put the mini turbo bush to the
holder*.
CaRPET CaRE CONTROL SELECTOR
MINI TURBO BRUSH aSSEMBLY*
The carpet care control selector raises and lowers the
height of the nozzle.
CLEaNER RELEaSE
Unlock the cleaner by pressing the left foot pedal.
POWER SWITCH
This vacuum cleaner features
Intellicare technology which
helps to protect your carpet from
unnecessary wear.
When you stop moving the cleaner
the power will automatically
decrease without switching off.
When the cleaner is moved or the
accessory hose is used the cleaner
automatically reverts back to full
power.
- 4 -
* Certain models only
Ensure that the cleaner is in the upright (parked)
position and move the selector to the required setting for
the carpet type or floor covering.
To obtain the best performance and energy efficiency
#1
it
is recommended that the adjustment setting position
1 is used for the main cleaning operations. The other
adjustment settings are for ease of use, use on longer
pile carpets, or for specialist cleaning tasks.
Settings
1.
Best performance and energy efficiency, short to
medium pile carpets, hard wooden floors, wooden floor
boards with crevices, ceramic tiles.
2.
Medium pile carpets, delicate floor coverings such as
vinyl or linoleum, parquet flooring.
3 or 4. For longer pile carpets the motion resistance
may increase. Use these intermediate settings to reduce
the force required to push the vacuum cleaner.
5. Luxury carpet and Tool mode.
IMPORTaNT: Using this cleaner for loop pile carpets
with pile greater than 30mm is not recommended.
Please consult the floorcare/carpet manufacturer’s
recommended cleaning instruction before vacuuming.
IMPORTaNT:
When cleaning delicate hard floors such
as vinyl or linoleum the selector switch must be moved
to position
2. Failure to do so may cause damage to
the floor surface.
This vacuum cleaner is supplied with an Energy Label as
required by European Regulation (EU) 665/2013. If the
label shows a red prohibition circle on the right covering
the hard floor symbol, then this indicates that the vacuum
cleaner is not suitable for use on hard floors.
#1
NOTE: Dust pick up ability carpet, dust pick up
ability hard floor, and energy efficiency in accord with
Commission Regulations (EU) 665/2013 and (EU)
666/2013.
gB
RELEASE
1
3
4
2
5