background image

- 8 -

User checklist

If your cleaner is not working properly run through the
following checklist.
1.   Is there a working electricity supply to the cleaner?

 

Check with another electrical product.

 

2.   Is the bin full or choked with fine dust?
 

To empty the bin, see instructions on P6.

 

3.   Is the hose blocked?
 

To clear a blockage, see instructions on P7.

4.   Is there a blockage in the cleaner base?
 

To clear a blockage, see the instruction on P7.

5.   Are the filters blocked?
 

To clean filters, see the instruction on P6.

6.   Is the nozzle height set correctly?
 

To set the carpet height selector, see the instruction on p4.

7.   Are the brushes rotating correctly?
 

To check the brushes, see the instructions on p7.

8.   Has the cleaner overheated? 
 

If so, it will take about 45 minutes to reset.

If there is any doubt call the Hoover Service Office for advice. They may be able
to assist you over the telephone. A service charge will be made if the cleaner is
examined and found to be in working order, has not been assembled in accordance 
with these instructions or has been used incorrectly. 

WaRNINg!

A thermal cut out switches off the cleaner to prevent overheating if it is used when 
full or there is a blockage or dirty filters. If this should happen switch off, unplug and
correct the fault.
It will take about 45 minutes for the cut out to automatically reset.

IMPORTaNT: 

Do not run cleaner over the supply cord as this could damage the 

supply cord insulation.

IMPORTaNT INFORMaTION

Hoover Service

Should you require service at any time, please contact your local Hoover Service 
Office.

Hoover spares and Consumables 

Always replace parts with genuine Hoover spares. These are available from your 
local Hoover dealer or direct from Hoover. When ordering parts always quote 
your model number.

gUaRaNTEE STaTEMENT

The guarantee conditions for this appliance are as defined by our representative in 
the country in which it is sold. Details regarding these conditions can be obtained 
from the dealer from whom the appliance was purchased. The bill of sale or receipt 
must be produced when making any claim under the terms of this guarantee.

Subject to change without notice.

Quality

Hoover’s factories have been independently assessed for quality. Our products 

are  made using a quality system which meets the requirements of ISO 9001

gB

Содержание ONEFI VR81OF01










Отзывы: