background image

4.

Before You Begin

This cleaner must be operated in accordance with these instructions and used only for domestic 
household cleaning to remove DRY dirt and dust from household carpets, flooring, walls and fabrics. 
This cleaner is not fit to be used as an industrial cleaner and will void the manufacturer’s warranty if used 
inappropriately. 

Please read these instructions thoroughly. This will ensure you obtain full benefit from your new cleaner. 
Keep this Instruction Manual in a convenient and safe place for future reference.

Important

Always switch the cleaner off and remove the plug from the electricity supply before cleaning your 
appliance, when not in use, or attempting any maintenance task. The cleaner must only be connected 
to an AC power supply at the voltage shown on the rating plate. This cleaner should only be used for its 
intended purpose as described in these instructions.

Precautionary Measures:

1. 

Do not

 operate the vacuum cleaner too close to heaters, radiators, and other hot surfaces.

2.  Before inserting the power plug into the power supply, make sure your hands are dry.

3.   Before turning on the vacuum cleaner, remove any large objects from the floor or cleaning 

surface in order to prevent damage to the filter.

4.  When removing the power plug from the power supply, 

do not

 pull the power cable, gently 

pull the power plug from the power supply.

5.  Do not use the vacuum cleaner to pick up water or liquids.

Содержание 9001PH Regal





















Отзывы: