W
arnings
7.
Assembly
1. Flexible Hose
Fitting:
Insert the flexible hose into the air inlet of the vacuum.
Press until it clicks into position.
Removing:
Press the two buttons and gentle pull to release the flexible hose.
b. Place the powerhead onto the floor and gently insert the
telescopic tube into the powerhead. Push until it clicks into
place.
2. Handle
Note: Ensure that the powerhead switch located on the handle
is in the “Off” position before fitting the handle to the rod. When
not using the powerhead, ensure that the Powerhead On/Off
Button is in the “Off” position.
a.
Gently insert the handle into the telescopic tube and push until
it clicks into place.
IMPORTANT! Always remove the power plug from the
power supply before fitting or removing accessories!
LIVE PARTS within the hose, rod and powerhead.
