background image

Conditions of warranty

Your Hoover cleaner, in the case of domestic use, has a two year 

parts and labour warranty, and a three year motor warranty against 

product defects and failures when the product is used in accordance 

with the terms and conditions of this warranty statement.
This warranty commences from the original date of purchase and is 

not transferable; please retain your original proof of purchase for any 

warranty claims. This warranty is valid only in the country where the 

cleaner is purchased.
The cleaner must be operated in accordance with these instructions 

and used only for domestic household cleaning to remove DRY dirt 

and dust from household carpets, flooring and fabrics. This cleaner 

is not fit to be used as an industrial cleaner, and is not designed for 

the collection of vitreous building material including particle board, 

construction products and similar products such as wood/fibres, 

cement, fillers, fibre glass etc. or excessive or frequent sand. The 

infrequent pick-up of these materials in these circumstances may be 

harmful to your cleaner and may void the manufacturer’s warranty.
Accessories and consumables including dust bags and filters, 

unless defective in manufacture, are not subject to this warranty. In 

order to prolong the life of accessories and consumables, regular 

care and maintenance is recommended.
When properly used and cared for, your cleaner will render excellent 

service; refer to the instruction manual for further details, as misuse 

or failure to follow the instructions makes this warranty void. 
In the event of service or advice being needed, please contact 

Electrical Home-Aids Pty Ltd, Ground Level, Building 3, Brandon 

Business Park, 530 Springvale Road, Glen Waverley Victoria 3150, 

or on 1300 360 845, Monday-Friday 9am-5pm EST. The decision 

to repair or replace the cleaner is at the sole discretion of Hoover 

Floorcare. If Hoover Floorcare decide to repair or replace the cleaner, 

it will do so at its own cost.

Hoover Floorcare is unable to accept responsibility under this 

warranty for any repair work not carried out by an authorised Hoover 

Service Agent or from the use of non-genuine parts. If any part is 

no longer available or manufactured, Hoover Floorcare will replace it 

with a genuine functional replacement part. This warranty does not 

apply to the cost of replacing any parts of the product due to normal 

wear and tear, alterations, improper installation, physical abuse, 

misuse or accidental damage. Any transportation costs involved in 

the repair of defective parts shall be borne by the claimant.
If proof of purchase cannot be provided at the time of a warranty 

claim or service, any work carried out on the cleaner is chargeable.
The repair of the cleaner under this warranty does not extend the 

original period of warranty.
The benefits conferred by this warranty are in addition to all other 

rights and remedies in respect of the product as outlined under the 

Competition and Consumer Act and other State and Territory laws.
“Our goods come with guarantees that cannot be excluded in 

the Australian Consumer Law. You are entitled to a replacement 

or refund for a major failure and for compensation for any other 

reasonably foreseeable loss or damage. You are also entitled to have 

the goods repaired or replaced if the goods fail to be of acceptable 

quality and the failure does not amount to a major failure.”

Call Hoover Floorcare  

with any product queries

Australia 

1300 360 845 

New Zealand 

0800 387 442

To find out more about our range,

visit: 

www.hoover.com.au 

www.hoover.co.nz 

email: 

[email protected]

V4 03/18

regal

Bagged Vacuum Cleaner with 

Deep Cleaning Powerhead

SAVE TIME, REGISTER WARRANTY ONLINE! 

www.hoover.com.au

 and 

www.hoover.co.nz

  

• 

 2

 Y

E A R

  WA RRA

NT

Y

  •

2

YEAR

3

YEAR MOTOR

WARRANTY

 3

 Y

EA

R  

M O

T O R   WAR

RA

N

T

Y

 •

Содержание 9001PH Regal





















Отзывы: