12.
Maintenance
IMPORTANT! Always remove the power plug from the power socket before
performing any maintenance.
Vacuum Cleaner Storage
When not in use, ensure that the cleaner is disconnected from to the power supply and that the cable is
fully retracted. The combination floor tool can be stored in the floor park clip. The powerhead must be
stored separately.
Replacing the Dust Bag
Note: only use the dust bag supplied or recommend by the manufacturer to avoid
causing damage to the machine and voiding the warranty.
Always operate the cleaner with the dust bag installed. If the dust
bag is not installed or installed incorrectly, the dust bag cover may
not close completely.
1. Remove the hose from the hose inlet.
2. Open the Dust Bag Cover.
3. To stop dust and debris from escaping the dust bag when
removing the dust bag from the machine, firmly hold the dust
bag in the dust bag holder and gently pull the dust bag seal.
