_________________________________________________________________________________________________
U408_flowthermNT_B_e_160420
27/35
www.hoentzsch.com
N-m3/h
=
standard flow rate in standard-m³ / hour calculated from flow velocity and
measuring section (FA: 5.3.2.2, VA: 5.3.8.1), operating conditions (FA:
5.3.4, VA: 5.3.9) and standard conditions (FA: 5.3.5, VA: 5.3.10).
N-l/min
=
standard flow rate in standard-liter / minute calculated from flow velocity
and measuring section (FA: 5.3.2.2, VA: 5.3.8.1), operating conditions (FA:
5.3.4, VA: 5.3.9) and standard conditions (FA: 5.3.5, VA: 5.3.10).
5.3.20.7
Units for TA sensors
Selection of unit for measured value display and data logger
Selection:
N-m/s
= standard flow velocity in meter / second
N-ft/min
= standard flow velocity in feet / minute
N-m3/h
= standard flow rate in m³/ hour calculated from flow velocity, measuring
section (see 5.3.13.1) and standard conditions (5.3.14)
N-l/s
= standard flow rate in liter / second calculated from flow velocity,
measuring section (see 5.3.13.1) and standard conditions (5.3.14)
N-l/min
= standard flow rate in liter / minute calculated from flow velocity,
measuring section (see 5.3.13.1) and standard conditions (5.3.14)
N-cfm
= standard flow rate in cubic feet / minute calculated from flow velocity,
measuring section (see 5.3.13.1) and standard conditions (5.3.14)
kg/h
= mass flow rate in kg / hour calculated from flow velocity,
measuring section (see 5.3.13.1), standard conditions (5.3.14)
and the entered standard density.
Long-term measurement settings:
5.3.21
Long-term measurement
Menu -> Settings -> Long-term measurement
5.3.21.1
Mode
Setting measuring mode for long-term measurement
Selection:
Start/Stop
=
Start/Stop mode
for long-term measurement
Start
=
Start mode
long-term measurement
also enter:
interval/s
= duration seconds
Auto
=
automatic mode
for long-term measurement
also enter:
interval/s
= duration in seconds
no. of values
= number of long-term measured values
Single measurements
=
single mode
with averaging via individually saved values
Description of long-term measurement with selection of various measuring modes:
LM Start/Stop mode is set:
1. press
LM-START to start long-term measurement. Displayed is the instantaneous value and the
measurement period in seconds (e.g. S00010) continually in the status field top right.
