_________________________________________________________________________________________________
U408_flowthermNT_B_e_160420
14/35
www.hoentzsch.com
5.2
Setup menu after switch on:
Menu
Settings
Sensor
FA input
Basic settings 5.3.1
Type 5.3.1.1
Range 5.3.1.2
Material 5.3.1.3
Directional sensing 5.3.1.4
Measurement settings 5.3.2
Medium 5.3.2.1
Section 5.3.2.2
Profile factor 5.3.2.3
Damping 5.3.2.4
Density correction 5.3.3
Operating conditions 5.3.4
Service temperature 5.3.4.1
Working pressure 5.3.4.2
Standard conditions 5.3.5
Standard temperature 5.3.5.1
Standard pressure 5.3.5.2
Standard density 5.3.5.3
Pairs of values 5.3.6
VA input
Basic settings 5.3.7
Type 5.3.7.1
Measurement settings 5.3.8
Section 5.3.8.1
Profile factor 5.3.8.2
Damping 5.3.8.3
Operating conditions 5.3.9
Service temperature 5.3.9.1
Working pressure 5.3.9.2
Standard conditions 5.3.10
Standard temperature 5.3.10.1
Standard pressure 5.3.10.2
Standard density 5.3.10.3
Pairs of values 5.3.11
TA input
Basic settings 5.3.12
Type 5.3.12.1
Measurement settings 5.3.13
Section 5.3.13.1
Profile factor 5.3.13.2
Pressure 5.3.13.3
Damping 5.3.13.4
Standard conditions 5.3.14
Standard temperature 5.3.14.1
Standard pressure 5.3.14.2
Standard density 5.3.14.3
Pairs of values 5.3.15
Pt100 input
Unit 5.3.16
Analog input 5.3.17
