_________________________________________________________________________________________________
U408_flowthermNT_B_e_160420
30/35
www.hoentzsch.com
Note: In this way the possible number of data records to be logged can be increased, as the length of the
data record is thus reduced. This has no impact on the time stamp for the logged values.
5.3.24.1
On / Off
Selection:
Data logger:
=
On
or
Off
Switch data logger on or off
With data logger on the data for long-term measurement
(see 5.3.21) is saved to the data logger
The data logger can also be switched on from the measured value
display with
LOGGER (via Selection: Settings -> Data logger)
or with
LOGGER-OFF switched off.
5.3.24.2
View
The contents of the data logger are shown on the display:
With
to the next data set
With
back to menu
With
or
MESS back to measured value display
5.3.24.3
Settings
Designation:
= freely adjustable
measuring point designation
with max. 8 digits for
all subsequently saved data logger values until entering a new measuring
point designation.
5.3.24.4
Delete
Delete the contents of the data logger:
Before deleting a prompt appears:
Delete data logger?
Confirm with
. Cancel with
or
MESS.
All the values saved to the data logger are deleted accordingly.
Before deleting, the data logger contents should be downloaded and saved via the USB port to a
Windows PC with the help of the optional HLOG II software, otherwise they will be lost.
Device status:
5.3.25
Device status
Menu -> Status
Display of status:
Hardware:
=
hardware version
Software:
=
software version
S. No.:
=
serial no.
Memory/%:
= display of
free space for data logger
in %
Battery/%:
= display of
battery capacity
in %
"0" is displayed when supply is via the USB connection.
When the battery symbol appears for the first time in the satus field top right
there is approx. 10 % battery capacity available.
Profile:
= last loaded profile (see 5.3.26)
