honle LED Cube 100, Руководство по эксплуатации

Страница: 7 / 20

# 69136a
7
2 Safety
General notes
Knowledge of all basic safety regulations is essential to ensure safe han-
dling and fault-free operation of an irradiation unit.
Intended use
The LED Cube 100 is an irradiation chamber which – together with the LED
Spot 100 and the LED powerdrive – is used to irradiate specimens with
high-intensity ultraviolet light and to harden adhesives and lacquers. Any
other usage beyond this scope is deemed to be improper.
The LED Cube 100 is constructed in accordance with the latest technical
developments and recognised safety rules.
In general, the following potential hazards
may arise during irradiation:

Thermal hazards

Danger from gases

Danger from electrical current

Danger from UV radiation
(see LED Spot 100 Safety)
Fig. 2: Irradiation chamber
Safety of external components
The LED Spot 100 is placed on top of the LED Cube 100. The irradiation
chamber is connected to the LED powerdrive control unit. In addition to the
usage information in these Operating Instructions, the safety information in
the following Operating Instructions must be strictly adhered to during op-
eration:
#65807 LED Spot 100 Operating Instructions
#68013 LED powerdrive Operating Instructions
General notes
Intended Use
Safety of
external
components