Honeywell XNX, Техническое руководство

Страница: 62 / 200

XNX Universal Transmitter
Section 2 - Installation and Operation 60
Figure 76. Current configured mV sensor and mV Available Sensor List
The first screen displays the currently configured sensor� Select
✓
to navigate to the Sensor Selection screen� To select a new
mV sensor, use the switches to scroll through the list� Use
✓
to select a sensor or
✖
to discard the sensor selection, retaining
the previously selected sensor, and return to the previous menu�
Set mA Sensor Type
Figure 77. Set mA Sensor Type Screen
Set mA Sensor Type identifies the type of mA sensor attached
to the transmitter� The available mA sensor choices are “Excel/
Optima” and “Other mA Sensor�”
Figure 78. mA Available Sensor List
To select a new mA sensor, use the switches to move
through the list� Use
✓
to make the selection or
✖
to discard the
selection, retain the previously selected sensor, and return to the
previous menu�
Note:
This configuration option is not available for XNX transmitters
with EC sensors.
Gas Selection
Gas Selection sets the target gas for sensors capable of
detecting multiple gases� The available gases for each of the
capable sensors is determined by the device connected to the
XNX transmitter�
Figure 79. Gas Selection Menu
After selecting Gas Selection, the initial screen displays the
current target gas� Select
✓
to display the list of available gases
for the configured sensor� Use the switches to scroll through
the list� A sample of the list is shown in Figure 81�
Figure 80. Available Target Gas List
Use
✓
to select the new gas or
✖
to discard the selection, retain
the previously selected gas, and return to the previous menu�