Honeywell UV100E series, Данные о продукции

Страница: 3 / 16

UV100E ULTRAVIOLET SYSTEMS
3 68-0262—5
Temperature Ratings:
Ambient Temperature Range: 30°F to 104°F (-2°C to 40°C).
Bulb Temperature Range (In Moving Air): 30°F to 140°F
(-2°C to 60°C).
Relative Humidity:
Up to 95% rh, non-condensing.
Dimensions:
See Fig. 3.
Approvals:
Underwriters Laboratories: File no. E223009
The health aspects associated with the use of this product and
its ability to aid in disinfection of environmental air have not
been investigated by UL.
INSTALLATION
When Installing this Product…
1. Read these instructions carefully. Failure to follow them
could damage the product or cause a hazardous
condition.
2. Check the rating given in the instructions and on the
product to make sure the product is suitable for your
application.
3. Installer must be a trained, experienced service
technician.
4. After installation is complete, check out product
operation as provided in these instructions.
WARNING
UV Light Hazard.
Harmful to bare skin and eyes.
Can cause temporary or permanent loss of vision.
View illumination only through lamp light indicator on
lamp handle.
To prevent exposure to ultraviolet light, disconnect
power to ultraviolet system before servicing any part of
heating and air conditioning system.
Do not mount device in location that allows ultraviolet
light to be seen after installation.
Do not attempt to bypass duct mount switch.
CAUTION
Personal Injury Hazard.
Power supply can cause electrical shock.
Disconnect power supply before beginning installation.
Do not open base unit or lamp handle; there are no
user-serviceable components inside.
Selecting Mounting Location
CAUTION
Equipment Damage Hazard.
Ultraviolet light can cause color shift or structural
degradation of plastic HVAC materials.
Select mounting location that prevents exposure to
plastic components with unknown resistance to
ultraviolet light. Three-feet minimum is recommended
between ultraviolet lamp and plastic-fabricated devices
(such as humidifiers and non-fiberglass media filters).
Depending on installation location, the UV System can operate
as an Air Treatment System or as a Surface Treatment
System.
Air Treatment System
Installed in the return air duct, the Air Treatment System kills a
high percentage of airborne germs circulating through the
forced air heating and cooling system. Individual results
depend on careful installation and maintenance and on the
actual amount of time the system fan operates. See Fig.1.
Fig. 1. Typical Air Treatment System installations.
M22857
WARNIN
G/AVER
TISSEM
ENT
!
Nocifs p
our la p
eau nue
et les
Veuillez lire
et bien com
prendre
l’install
ation et
la maint
enance.
WARNIN
G/AVERT
ISSEMEN
T
!
Nocifs p
our la
peau nue
et les
Veuillez
lire et
bien com
prendre
l’instal
lation et
la maint
enance.