manualshive.com logo in svg

Honeywell TotalPlant LCN, Установка системы

Поделиться
Скачать
Honeywell TotalPlant LCN Скачать руководство пользователя страница 31

LCN System Installation

3-15

9/96

3.6.1

3.6.1  LCN Cabling Rules

Local Control Network (LCN) must be

•

a maximum coax cable length that is a total of 300 meters (984 feet).  This includes 
cable segments.

•

a minimum cable length of 2 meters (6 feet) between any two nodes on the 
network.

The RS-485 interface on the 4 of DNPKG modules is not a part of the restriction.

W A R N I N G

TotalPlant

 Solution (TPS) System LCN coaxial cables and associated components have

been designed and tested by Honeywell IAC to meet strict standards of performance.
Other coaxial cables and components have not been tested and qualified for use in the
LCN system; therefore, no substitutions are approved by IAC.

Various lengths of coaxial cable are available as standard products and must be ordered
from Honeywell IAC.

Содержание TotalPlant LCN





































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды