Honeywell Stratos 2700, Руководство пользователя

Страница: 70 / 278

3 - 34
Block Check Character
When this selection is set to Transmit , the NCR Block Check Character (BCC) is expected with incoming messages and
transmitted with outgoing messages. Default = Transmit.
NCR Prefix
This selection allows you to program an NCR-specific prefix. Refer to the ASCII Conversion Chart (Code Page 1252) on
page A-3 to find the hex equivalent for the characters you want for the NCR prefix (typically, 02 for STX). Scan the bar code
below, then set the hex number (from 0-FF) by scanning digits from the
Programming Chart , then scanning Save .
Default = 0.
NCR Suffix
This selection allows you to program an NCR-specific suffix. Refer to the ASCII Conversion Chart (Code Page 1252) on
page A-3 to find the hex equivalent for the characters you want for the NCR suffix (typically, 03 for ETX). Scan the bar code
below, then set the hex number (from 0-FF) by scanning digits from the
Programming Chart , then scanning Save .
Default = 0.
NCR NOF (Not-on-File) Error
A scanner receives an NOF (Not on File) command from the POS whenever it cannot cross-reference the bar code to a
price parameter. When set to
On , the error tone sounds for an NOF, and disables the scanner while the cashier looks up
the price manually. (The tone is set via Beeper Pitch – Error , page 4-11 and number of beeps are set via NCR NOF (Not-
on-File) Number of Beeps , page 3-35). When set to Off , a good read beep sound is emitted for an NOF. Default = Off.
* Transmit
Don’t Transmit
NCR Prefix
NCR Suffix
On