Honeywell Stratos 2700, Руководство пользователя

Страница: 177 / 278

9 - 47
Default = Don’t Require 5 Digit Addenda.
Addenda Timeout
You can set a time during which the scanner looks for an addenda. If an addenda is not found within this time period, the
data can be either transmitted or discarded, based on the setting you are using for
EAN/JAN-13 Addenda Required . Set
the length (in milliseconds) for this timeout by scanning the bar code below, then setting the timeout (from 0-65535 millisec-
onds) by scanning digits from the
Programming Chart , then scanning Save . Default = 100.
Note: The Addenda Timeout setting is applied to all addenda and coupon code searches.
EAN/JAN-13 Addenda Separator
When this feature is On , there is a space between the data from the bar code and the data from the addenda. When turned
Off , there is no space.
Default = Off.
Note: If you want to enable or disable EAN13 with Extended Coupon Code, refer to UPC-A/EAN-13 with Extended Coupon
Code (page 9-32).
EAN/JAN-13 Redundancy
If you are encountering errors when reading EAN/JAN-13 bar codes, you may want to adjust the redundancy count.
Redundancy adjusts the number of times a bar code is decoded before transmission, which may reduce the number of
errors. Note that the higher the redundancy count, the longer it will take to decode the bar code. To adjust the redundancy,
scan the
EAN/JAN-13 Redundancy bar code below, then scan a redundancy count between 0 and 10 on the
* Don’t Require 5 Digit Addenda
Require 5 Digit Addenda
Addenda Timeout
On
* Off