Honeywell Stratos 2700, Руководство пользователя

Страница: 116 / 278

7 - 6
Next, scan the Character to Trigger Delay bar code, then the 2-digit hex value for the ASCII character that will trigger the
delay ASCII Conversion Chart (Code Page 1252), beginning on page A-3.
To remove this delay, scan the Delay Length bar code, and set the number of delays to 0. Scan the Save bar code using
the Programming Chart inside the back cover of this manual.
Interfunction Delay
An interfunction delay of up to 65535 milliseconds (in 1ms increments) may be placed between the transmission of each
segment of the message string. Scan the
Interfunction Delay bar code below, then scan the number of 1ms delays, and
the Save bar code using the Programming Chart inside the back cover of this manual.
To remove this delay, scan the Interfunction Delay bar code, then set the number of delays to 0. Scan the Save bar code
using the Programming Chart inside the back cover of this manual.
Intermessage Delay
An intermessage delay of up to 65535 milliseconds (in 1ms increments) may be placed between each scan transmission.
Scan the
Intermessage Delay bar code below, then scan the number of 1ms delays, and the Save bar code using the
Programming Chart inside the back cover of this manual.
To remove this delay, scan the Intermessage Delay bar code, then set the number of delays to 0. Scan the Save bar code
using the Programming Chart inside the back cover of this manual.
Delay Length
Character to Trigger Delay
Interfunction Delays
Prefix Scanned Data Suffix
1 2 3 4 5 STX HT CR LF
Interfunction Delay
2nd Scan Transmission 1st Scan Transmission
Intermessage Delay
Intermessage Delay