background image

32333651-A-EN | A | 12/17
© 2017 Honeywell International Inc.
Arduino is a trademark or registered trademark of Arduino, LLC in the United States and/or other countries.

Warranty/Remedy

Honeywell warrants goods of its manufacture as being free 
of defective materials and faulty workmanship during the 
applicable warranty period. Honeywell’s standard product 
warranty applies unless agreed to otherwise by Honeywell 
in writing; please refer to your order acknowledgement or 
consult your local sales office for specific warranty details. 
If warranted goods are returned to Honeywell during the 
period of coverage, Honeywell will repair or replace, at its 
option, without charge those items that Honeywell, in its sole 
discretion, finds defective. 

The foregoing is buyer’s sole 

remedy and is in lieu of all other warranties, expressed or 

implied, including those of merchantability and fitness for a 

particular purpose. In no event shall Honeywell be liable for 

consequential, special, or indirect damages.

While Honeywell may provide application assistance personally, 
through our literature and the Honeywell web site, it is buyer’s 
sole responsibility to determine the suitability of the product in 
the application.

Specifications may change without notice. The information we 
supply is believed to be accurate and reliable as of this writing. 
However, Honeywell assumes no responsibility for its use.

Honeywell serves its customers through a worldwide network 
of sales offices and distributors. For application assistance, 
current specifications, pricing or name of the nearest 
Authorized Distributor, contact your local sales office or:

For more information

Honeywell Sensing and Internet of Things services its 
customers through a worldwide network of sales offices and 
distributors. For application assistance, current specifications, 
pricing or the nearest Authorized Distributor, visit sensing.
honeywell.com or call:
Asia Pacific  

+65 6355-2828

Europe    

+44 (0) 1698 481481

USA/Canada  

+1-800-537-6945

    

 

WARNING

PERSONAL INJURY

DO NOT USE these products as safety or emergency stop 
devices or in any other application where failure of the 
product could result in personal injury.

Failure to comply with these instructions could result in 
death or serious injury.

Honeywell Sensing and Internet of Things

9680 Old Bailes Road
Fort Mill, SC 29707
www. honeywell.com

Содержание SEK002

















Отзывы: