Honeywell SEK002, Инструкция пользователя

Страница: 12 / 16

12 Sensing and Internet of Things
Sensor Evaluation Kit, SEK002
Issue A
32333651
APPENDIX C. JUMPER CONFIGURATIONS
Table C1. ABP Series Common Power Supply Selection
Output
Package Style
DIP SMT Leadless SMT
Enable J3 (1-2) J2 (1-2) J1 (1-2)
I
2
C J5 (1-2), J4 (1-2) J5 (1-2), J4 (1-2) J5 (1-2), J4 (1-2)
SPI J8 (2-3), J9 (2-3) J8 (2-3), J9 (2-3) JJ8 (2-3), J9 (2-3)
Jumper J6 may be set for either an internal power supply (furnished on the Arduino Uno Rev3) or an external power supply
(furnished by the user). Although the internal voltages are approximately 3.3 Vdc and 5 Vdc, they are not exact. The difference may
affect sensor output due to self-heating on the pressure die, causing some ratiometricity error.
To use an external power, remove the jumper from J6 and supply the external power to pin 3 (COM) on J6.
(
Note: Make these connections prior to powering the Arduino Uno Rev3 through the USB cable in Table 3, Step 2. Ensure that the
SEK002 terminals are not damaged when connecting the external power supply.)
Table C2. MPR Series Common Power Supply Selection
Output Leadless SMT Package Style
Enable J19 (1-2)
I
2
C J8 (1-2), J9 (1-2)
SPI J8 (2-3), J9 (2-3)
Table C4. HPM Series Common Power Supply Selection
Output Sensor
UART Jumpers are not required - use cable referenced in Appendix F.
Table C3. HumidIcon HIH6000 Series, HIH6100 Series, HIH7000 Series, HIH8000 Series, HIH9000 Series Common Power Supply
Selection
Package Style
Output
I
2
C Pin
SPI Pin, SOIC
SIP SOIC
Enable J10 (1-2) J12 (1-2) J11 (1-2)
I
2
C - J14 (1-2), J13 (1-2) -
SPI - - J14 (2-3), J13 (2-3)