Sensing and Internet of Things
15
Sensor Evaluation Kit, SEK002
Issue A
32333651
Figure E1. MPR Series Breakout Board Schematic and Dimensions
APPENDIX E. MPR Series Breakout Board
18,00
[0.71]
44,00
[1.73]
2x
ø
3,
50
[0.14]
Figure F1. Cable 32332297-001 Dimensions
APPENDIX F. Cable 32332297-00
Schematic
Breakout board dimensions
(For reference only: mm/[in].)
150
[5.9]
Pin
8
7
6
5
4
3
2
1
Pin
1
2
3
4
5
6
7
8
The MPR Series sensors are available on a breakout board, allowing power and
communications lines to be more easily attached to a sensor without the risk of hand
soldering or the expense of creating your own evaluation PCB. The breakout board can be
used with the SEK002 Sensor Evaluation Kit and software or any I
2
C or SPI control circuit.
If the SEK002 is not used, please provide 1 kOhm pull up resistors on SCL and SDA lines
when using I
2
C communications. Refer to the MPR Series data sheet for programming
instructions.
Dimensions (For reference only: mm/[in].)
1
2
SS
SCL/SCLK
MISO
MPR Series
Sensor
MOSI/SDA
V
DD
0.1
µ
F
NC
NC
V
SS
3
4
5
6
7
8
9
10
Breakout board
connector pin
3
7
12
1
2
10
Pad
The 32332297-001 is a specialized cable, available separately from Honeywell, used to connect the HPM Series to the SEK002.
Do not use cables from other manufacturers.
