NOVAR ES3.S EXECUTIVE CONTROLLER
31-00366—01
8
SPECIFICATIONS
Agency Approvals
Listed device:
CUL/UL E90949
Standards used:
UL 916 5th Edition, Energy Management Equipment CSA C22.2, No. 205-17 3rd edition
Power Requirements
Voltage:
24 VAC, Class 2 (22 to 30 VAC), 50/60 Hz
Consumption:
40 VA
Input / Output Ratings
Analog Inputs:
4 to 20 mA current loop (Ac/- 2% of span)
NOTES:
—
Prior to installation, verify that the existing xcm.10S or Savvy base was wired with an appropriate 24VAC 40VA
Class 2 transformer.
—
4-20mA sensors used with the analog inputs must be capable of producing 20mA with a sensor supply of
13.25V.
Loop Source:
24VDC at 500mA max
Digital Inputs:
Contact closure only
Universal Inputs
Thermistor:
Type 3, 10K. -10 to 135 F (-23.3 to 57.2C)
Voltage:
0-10VDC, Input impedance > 5Kohms
Current:
0-20mA (Switch selectable)
Resistance:
0 - 100K Ohms
Digital:
Contact closure only. (330uA Wetting Current)
Relay Outputs:
24 VAC or VDC, 2 amp (pilot duty) Class 2
Output (Fault):
24 VAC or VDC, 2 amp (pilot duty) Class 2
System Diagnostic Inputs
On-board Temperature:
-40° to 257°F (-40 to 125C).
AC Supply Monitor:
0 to 53 VAC (+/-5% of span)
AC Fault Input:
>7VDC= AC OK
System:
+5VDC
Monitor:
0 to 10VDC (+/-5% of span) 5VDC Nominal
Operating Environment
Temperature:
32°F to 122°F (0°C to 50°C)
Humidity:
0 to 95% Relative, non-condensing
Physical Dimensions (Electronics Only)
Height:
19 inches
Width:
13.25 inches
Depth:
2.5 inches
Weight:
4.20 lbs (executive controller and cover plate)
