manualshive.com logo in svg

Honeywell ML7284, Данные о продукции, Страница: 5 / 8

Поделиться
Скачать
Honeywell ML7284 Скачать руководство пользователя страница 5

ML7284 NON-SPRING RETURN DIRECT COUPLED DAMPER ACTUATOR

63-2504—2

5

9

Tighten the two 8 mm by 12 mm long set screws firmly
against the damper shaft (80-100 lb-in.).

Preparation

Before installing the ML7284 on the damper shaft, determine
the opening direction of the damper shaft (see Fig. 2) to
correctly connect the wiring.

Installation

Installing Actuator and Mounting Bracket
(Single Point Mounting)

1

Place the ML7284 Non-Spring Return Direct Coupled
Damper Actuator over the damper shaft.

2

Position the actuator for best access to the actuator
damper shaft locking screw.

3

Install the mounting bracket (see Fig. 2) and adjust it so
the tab is midway in the actuator slot. Mark the screw
holes for installing the mounting bracket on the damper
housing.

4

Remove the mounting bracket and actuator.

5

Drill or center punch the starting holes for the mounting
bracket screws (or use no. 10 self-tapping sheet metal
screws, not provided).

6

Place the actuator and mounting bracket back into
position over the damper shaft and install the mounting
bracket screws.

7

Move damper shaft either fully cw

 or ccw

 .

8

Fully depress and hold disengage button while moving
actuator hub either fully cw          or fully ccw

    to

match damper shaft. Release disengage button.

Fig. 2. Installing mounting bracket on ML7284

Non-Spring Return Direct Coupled Damper Actuator.

 NOTE:  Install mounting bracket so mounting bracket tab

is centered in actuator slot.

M7619B

REVERSE

DIRECT

ACTUATOR 
SLOT

Fig. 3. Mounting hub to back of actuator.

12

12

30

30

0

60

60

90

M7620C

DETENT
INSERT

INDICATOR
DETENTS

DISENGAGE 
BUTTON

HUB
SLEEVE

HUB
INSERTS

REVERSE

DIRECT

POSITION
INDICATOR

RETAINING
RING

Содержание ML7284









Отзывы:

Нет отзывов