9
Adjustable Rope Anchor (Part SE-ARA)
The adjustable rope anchor is quick and convenient option for
anchoring the SafEscape Device to an anchorage point such
as a ladder.
To install the rope anchor, follow the steps below.
Step 1 - Wrap rope
anchor around approved
anchorage and attach
locking carabiner through
both the eye of the
rope grab and the rope
thimble. Ensure that the
carabiner is completely
closed and locked
Step 2 - Push upward on
the rope grab until the
rope anchor is taut.
To remove the rope
anchor, squeeze the
rope grab to release the
locking mechanism and
loosen the rope. Then
detach the carabiner and
remove rope anchor from
anchorage
Anchor Sling (Part SE-AS/4.0FT & SE-AS/2.5FT)
The anchor sling is used to facilitate anchoring the SafEscape
Device to a variety of anchorage points, such as I-beams,
ladder rungs, etc.
To install, wrap the anchor sling around the anchorage point
and pull one end through the other end. Pull tight and connect
the anchorage carabiner on the SafEscape Device to the web sling.
Pulley (Part SE-P)
The pulley can be used to
re-direct the rescue lifeline
away from the anchor point
if needed. This may be
necessary to avoid sharp
edges or obstacles in the
descent path.
To attach pulley to lifeline,
follow the steps below.
Step 1 - Rotate one half of the pulley to allow insertion of
the lifeline. Once lifeline is inserted, return pulley to aligned
position.
Step 2 - Attach locking carabiner to pulley. Ensure that the
carabiner is completed closed and locked.
