12
DATE OF MANUFACTURE (MM/DD/YY):
MODEL: SE-ARA
MATERIAL: POLYESTER, NYLON & STAINLESS STEEL
CAUTION: INSPECT BEFORE EACH USE
PUNCH GRID
ON DA
TE OF
FIRST USE
J
YR
F
M
A
M
J
J
A
S
O
N
D
1
2
3
4
5
LB1081 / MFP9349652
Adjustable
Rope Anchor
1-800-873-5242
WARNING
/ ADVERTENCIA / A
VERTISSEMENT
MANUFACTURER’S INSTRUCTIONS SUPPLIED WITH THIS
PRODUCT AT TIME OF SHIPMENT MUST BE FOLLOWED:
FAILURE T
O DO SO COULD RESULT IN SERIOUS INJUR
Y OR
DEATH. CONT
ACT MILLER FALL
PROTECTION IF INSTRUCTION
MANUAL IS NEEDED.
DEBEN SEGUIRSE LAS INSTRUCCIONES DEL F
ABRICANTE
PROVISTAS CON ESTE PRODUCT
O AL
MOENTO DES
DESPACHO: EL
NO NACERLO PUEDE RESULTAR EN LESIONES
GRAVES O LA
MUERTE. SI SE REQUIRE EL MANUAL
DE
INSTRUCCIONES CONSULTE CON MILLER F
ALL PROTECTION.
VOUS DEVEZ RESPECTER LES INSTRUCTIONS DU FABRICANT
QUE VOUS AVEZ RECUES
AVEC LE PRODUIT
: DANS LE CAS
CONTRAIRE VOUS RISQUEZ DES BLESSURES GRAVES OU
MEME LAMORT. CONT
ACTEZ MILLER FALL
PROTECTION SI
VOUS AVEZ BESOIN D’UN NOUVEAU MANUEL.
WARNING:
▪ CONNECT
ORS AND
ANCHORAGE POINTS MUST BE
COMPATIBLE
AND ABLE T
O SUPPORT 5,000 LBS. (22kN)
OR MEET OSHA 1926.502 REQUIREMENTS FOR
A SAFETY
FACT
OR OF TWO.
▪ A
VOID CONTACT WITH SHARP
OR ABRASIVE SURF
ACES.
▪ REMOVE FROM SER
VICE IF SUBJECTED TO F
ALL ARREST
FORCES.
EXPIRATION DA
TE: SEE MANUAL FOR INSPECTION
MAX. CAPACITY
: 400 LBS (181.4KG)
(See instructions & applicable fall protection code.)
OSHA, ANSI
A10.32 & Z359.1 [310 LBS (140.6KG)]
REFER TO INSTRUCTIONS FOR INST
ALLATION.
ARROW ON ROPE GRAB
MUST FACE UPW
ARD WHEN INSTALLED.
DO NOT REMOVE THIS LABEL
Labels