Honeywell Lynx Plus Series, Инструкция по установке и настройке

Страница: 22 / 80

Lynx Plus Series Installation and Setup Guide
- 22 -
Data Field Descriptions
33 33 33 33
ALRM ALRM ALRM ALRM SND SND SND SND TIMEOUT TIMEOUT TIMEOUT TIMEOUT
Alarm Bell Timeout
This field determines whether the external sounder will shut off after a selected time, or
allowed to continue until manually turned off.
UL installations: must be set for a minimum of 4 min (option 1)
SELECTIONS
0 = No timeout 2 = 8 minutes 4 = 16 minutes
1 = 4 minutes 3 = 12 minutes
Fields
✻
34–
✻
36:
Fields *34, *35 and *36 are used to program different options in the Lynx Plus and LynxSIA Plus
controls. Please be sure that you use the correct field for the control being installed.
Note: The LynxSIA Plus control validates the data entered in fields *34 - *36. If the selection is not valid the control will emit a
single long beep indicating that the selection has been rejected. The control replaces the selection with the default
value which is displayed on the keypad and advances to the next field.
34 34 34 34
EXIT EXIT EXIT EXIT DELAY DELAY DELAY DELAY TIME TIME TIME TIME
Exit Delay
The system will wait the time entered before sounding an alarm if the exit door is left
open after the system has been armed.
UL installations: Exit Delay must be set for a maximum of 60 seconds
SIA: Exit Delay must be set to a minimum of 45 seconds.
Lynx Plus SELECTIONS LynxSIA Plus SELECTIONS (Entries from 45-97)
00-99 = exit delay in seconds Entered Value Exit Delay in Seconds
45-96
97 45-96
120
35 35 35 35
ENTRY
ENTRY ENTRY
ENTRY DEL
DEL DEL
DELAY
AY AY
AY 1111
Entry Delay 01
The system will wait the time entered before sounding alarm upon entering if system is
not disarmed.
UL installations: The Entry Delay must be set for a maximum of 45 seconds
SIA The Entry delay must be set to a minimum of 30 seconds. The sum of entry delay 1,
entered in Field ✻ 35, and the burglary abort window, entered in Field ✻ 50, should
not exceed 1 minute.
Lynx Plus SELECTIONS LynxSIA Plus SELECTIONS (Entries from 30-99)
00-99 = entry delay in seconds Entered Value Entry Delay in Seconds
30-96
97
98
99 30-96
120
180
240
36
36 36
36
ENTRY
ENTRY ENTRY
ENTRY DELAY
DELAY DELAY
DELAY 2222
Entry Delay 02
The system will wait the time entered before sounding alarm upon entering if the
system is not disarmed.
UL installations: must be set for a maximum of 45 seconds
SIA The Entry delay must be set to a minimum of 30 seconds. The sum of entry delay 2
entered in Field ✻ 36 and the burglary abort window entered in ✻ 50 should not
exceed 1 minute.
Lynx Plus SELECTIONS LynxSIA Plus SELECTIONS (Entries from 30-99)
00-99 = entry delay in seconds Entered Value Entry Delay in Seconds
30-96
97
98
99 30-96
120
180
240