Honeywell HRHH1081, Руководство пользователя

Страница: 91 / 152

Configuring Event Settings | 91
800-19403 - A - 12/2014
Configuring Network Event Settings
To configure network event settings
1. Go to Main Menu > Setting > Event > Abnormality > Network .
2. On the Network tab, in the Event Type box, select the event type that you want to
configure settings for: Net Disconnection , IP Conflicted , MAC Conflicted .
3. Select the Enable check box to enable network error detection.
4. Select the actions that you want the system to initiate when the selected event occurs:
5. Click Apply to save your settings.
• Alarm Out Select the check box to activate the selected alarm output(s) ( 1 , 2 , or 3 ).
In the Latch box, specify the amount of time (1–300 s) to delay the alarm
output signal after the network event is triggered.
• Show Message Select the check box to enable a pop-up message on your local host PC.
• Send Email Select the check box to enable the system to send an email notification.
• Record Channel Select the channel(s) that you want to record. In the Delay box, specify
the amount of time (1–300 s) to delay recording after the network event
is triggered.
• Buzzer Select the check box to activate a buzzer noise at the DVR.