Honeywell HRHH1081, Руководство пользователя

Страница: 113 / 152

Configuring System Settings | 113
800-19403 - A - 12/2014
Configuring Zero-Channel Settings
The zero channel function lets you view several video sources on one channel in a web browser,
saving bandwidth and improving upload speeds.
To configure zero channel encoding
1. Go to Main Menu > Setting > System > Display > Zero-Ch Encode .
2. On the Zero-Ch Encode tab, configure the following settings:
3. Click Apply to save your settings.
4. Open a web browser, enter the DVR’s remote access IP address in the browser’s address
field, and then log in.
5. Select Multi-Preview in the remote web client interface to display all of the DVR’s video
sources in one channel.
• Enable Select the check box to enable the zero-channel function or clear
the check box to disable it.
• Compression Select the desired video compression standard from the list. The
default setting is H.264.
• Resolution Select the desired video resolution from the list. The default
setting is
D1 .
• Frame Rate (FPS) Select a value between 1 and 30 (NTSC) or between 1 and 25
(PAL).
• Bit Rate (Kb/S) Select a value between 896 and 4096 . The default setting is
1024 .