Honeywell HRHH1081, Руководство пользователя

Страница: 50 / 152

www.honeywell.com/security
50 | Performance Series HQA Digital Video Recorder User Guide
To configure snapshot recording settings
1. Go to Main Menu > Setting > Camera > Encode > Snapshot .
2. On the Snapshot tab, configure the following settings:
3. Click Apply to save your settings.
4. To copy the settings to additional channels, click Copy , select the channels that you want
to copy the settings to, and then click OK .
Note The DVR assigns event-activated snapshots a higher priority than
schedule-activated snapshots. If you have enabled both of these types of
snapshots, then the system activates an activation snapshot when an alarm
occurs. If there is no alarm, then the DVR takes snapshots according to the
schedule setup.
• Snap Number Select the number of snapshots to take at a time.
• Channel Select the channel that you want to configure the settings for.
• Mode Select Timing to take snapshots according to a schedule.
Select Trigger to take snapshots when a motion detection, video
loss, video tampering, or alarm event occurs.
• Image Size Select a file size ( D1 , HD1 , 2CIF , CIF ).
• Image Quality Select a value between 1 and 6 , with 6 being the highest quality.
• Snapshot Frequency Select a value between 1 SPL (second per picture) and 7 SPL or
click Customized to enter your own setting.