Honeywell HERMetic UTImeter Gtex, Руководство по эксплуатации и обслуживанию

Страница: 15 / 64

50461/GTEX MMC/1111 UTImeter Gtex MMC
15
7.2 ULTRA sensing probe
7.2.1 Introduction
The ULTRA sensing probe consists of a
stainless steel tube terminated by a high-
tech plastic head which cannot be
removed from the tube. The sensing
probe includes an ultrasonic liquid level
sensor, a temperature sensor and a
conductivity electrode. The sensitivity for
ullage and interface measurement is not
adjustable. The temperature
measurement is calibrated at the factory
and does not require subsequent
adjustment.
7.2.2 Ullage detection
The ullage detector consists of two
piezoceramic plates and electronic
circuits. When the sensor head is
immersed in a non-conductive liquid (oil
or petroleum), the emitted ultrasonic
signal is detected by the receiver, coded
and sent to the instrument unit which
activates the buzzer with the continuous
beep.
1
6
0
1
2
3
4
5
0
1
1
2
1
Reaction point
Ultrasonic level sensor
4 mm
Air
Liquid
Figure 7-3
The reaction point is located 4 mm (5/32") from the sensor bottom and identical with the zero-point of the tape graduation.