Honeywell HEN04101(X), Руководство пользователя

Страница: 48 / 240

www.honeywell.com/security
48 | Performance Series Network Video Recorder User Guide
9 Time Bar Unit Select from: 24H , 12H , 1H , and 30M . The smaller the
unit, the more magnified the time bar. The time bar
allows you to select a more accurate time for
playback.
The time bar begins at 00:00 when you are setting
the configuration. The time bar displays the time
period for the video that is playing, plus a range of
time before and after.
10 Backup 1. From the File list, select the file(s) that you want
to back up. The system allows you to select up to
four channels.
2. Click the Backup button. The Backup menu
appears.
3. Click Start to begin backing up the file(s).
Check the file again to cancel the current selection.
The NVR can display up to 32 files from one channel.
11 Clip The Clip button is used to edit files.
1. While playing the file you want to edit, click Clip
when you want to edit that file.
A slide bar appears that corresponds to the
channel for the recorded video.
2. Adjust the time slide bar or enter a specific time
for the recorded file end time.
3. Click Clip again, and then save the current file as
a new file.
12 Record Type While in any playback mode, the time bar changes if
you modify the
Search type.
OTHER FUNCTIONS
14 Other Channel
Synchronization Switch to
Play When Playing Back When playing a video file, click a channel number
button to switch to video from another channel that
was recorded at that time.
15 Digital Zoom 1. When in full-screen playback, left-click your
mouse on the screen.
2. Drag your mouse across the screen to select a
region, then left-click the mouse to open Digital
Zoom.
Right-click your mouse to exit Digital Zoom.
16 Manually Switch Channel
When Playing Back When in full-screen playback, you can switch to
another channel either by using the drop-down list or
by
scrolling your mouse.
This function is not available if there is no recorded
file or if the NVR is conducting a Smart Search.
Table 3-4 Search GUI
Number Name Function