User Manual of Explosion-Proof Bullet Camera
7
4.
Set port mapping. E.g. 80, 8000 and 554 ports. The steps for port mapping vary depending on
different routers. Call the router manufacturer for assistance with port mapping.
5.
Apply a domain name from a domain name provider.
6.
Configure the DDNS settings in the setting interface of the router.
7.
Visit the camera via the applied domain name.
Connecting the network camera via a modem
Purpose:
This camera supports the PPPoE auto dial-up function. The camera gets a public IP address by
ADSL dial-up after the camera is connected to a modem. You need to configure the PPPoE
parameters of the network camera. Refer to
Section 6.1.1 Configuring PPPoE Settings
for
detailed configuration.
The obtained IP address is dynamically assigned via PPPoE, so the IP address always changes after
rebooting the camera. To solve the inconvenience of the dynamic IP, you need to get a domain
name from the DDNS provider (E.g. DynDns.com). Follow the steps below for normal domain
name resolution and private domain name resolution to solve the problem.
Normal Domain Name Resolution
Steps:
1.
Apply a domain name from a domain name provider.
2.
Configure the DDNS settings in the
DDNS Settings
interface of the network camera. Refer to
Section 6.1.1 Configuring DDNS Settings
for detailed configuration.
3.
Visit the camera via the applied domain name.
