Rev 1.01
13
Document 900.0342
10/05
Dome Replacement
If the polyccarbonate dome is damaged or scratched beyond use, contact your
distributor or salesperson to order a dome replacement. To replace the HD14
dome (see
Figure 9
):
1.
Use the security hex key (supplied) to loosen the three #8-32 x 7/16 inch
security screws securing the HD14 lid to the base.
2.
Use a Phillips screwdriver to remove the three #8-32 x 3/8 inch Hi-lo tapping
screws that attach the dome retainer plate to the front cover.
3.
Remove the damaged dome and replace it with the new dome.
4.
Use a Phillips screwdriver to attach the dome retainer plate to the HD14 front
plate with the screws you removed in step 2.
5.
Use the security hex key to secure the HD14 lid to the base.
Figure 9
Dome Replacement
8-32 x 7/16 inch captive security
screws (x3)
Polycarbonate dome
Dome turret
Gasket
Retainer plate
8-32 x 3/8 inch Hi-lo tapping
screws (x3)
Front cover
