To connect multiple
Mimic LED Driver Cards
You can daisy chain up to two
Mimic LED driver cards
to the
Master Repeat Card
using the 20 way flat
flexible cable
.
How to connect a flat flexible cable
Hold the locking tab by the edges and lift it upwards a little
j
and insert the flat flexible cable
k
into the
socket. Ensure the cable contacts are on the opposite side to the locking tab. Push down the locking tab
l
to lock the flat flexible cable.
How to disconnect a flat flexible cable
Hold the locking tab by the edges at positions
m
and lift it upwards one side at a time
n
to disengage the flat
flexible cable. Then remove the cable
o
from the socket.
To connect the ribbon cables from
Mimic LED Driver card
to
Connection converters
Connect one end of the 26 way ribbon cable
to the IDC header on the
Mimic LED Driver card (P11)
and
the other end to a
Connection converter
. The
Mimic LED Driver card
can accommodate up to 6 - 26 way
ribbon cable for wiring LEDs via 6
Connection converter
s.
4188-951_issue 2_01/12_Part 1_Mimic LED driver
3
Mimic LED Driver Card
Data and Installation
P13
P4
OUT
P5
IN
Master Repeat Card
P4
OUT
P5
IN
Mimic LED Driver
Card 1
To connect a flat flexible cable
P13
P13
To disconnect a flat flexible cable
Mimic LED Driver
Card 2
B
B
A
B
2 4 6
10
8
12 14 16 18 20 22
26
24
1
3
5
9
7
11 13 15 17 19 21
25
23
Connector
Converter 1
P16
P15
P14
P13
P12
P11
Mimic LED Driver Card
26 way ribbon cable
2 4 6
10
8
12 14 16 18 20 22
26
24
1
3
5
9
7
11 13 15 17 19 21
25
23
Connector
Converter 2
2 4 6
10
8
12 14 16 18 20 22
26
24
1
3
5
9
7
11 13 15 17 19 21
25
23
26 way ribbon
cables
Connector
Converter 6
Connection to 128 LEDs
Connection to 128 LEDs
Connection to 128 LEDs
A
