________________________________________________________________________________________________________
Document 800-05305 Rev A
73
11/09
Activate PTZ Preset on Sensor
1.
Create a PTZ Preset Position. See instructions in the PTZ Setup chapter.
2.
Click the Setup button on the Display Screen.
3.
Click the Sensor tab to open the Sensor and Output display.
4.
Click Sensor Preset.
5.
Select the desired camera from the Channel list.
6.
Select the appropriate Sensor from the list.
7.
Select the preconfigured PTZ Preset from the list.
8.
Click Set. A list of configured Sensor Presets will display in the box below.
9.
Repeat for additional sensors.
10.
Click OK to close the Sensor Preset window.
