Honeywell Farenhyt RPS-1000 Скачать руководство пользователя страница 48 | Manualshive

Страница: 48 / 50

background image

•

Repairs and returns should be sent to:
Honeywell Fire Systems
Attn: Repair Department / RA Number_______________________
12 Clintonville Road
Northford, CT 06472 USA

Manufacturer Warranties and Limitation of Liability

Manufacturer Warranties.

Subject to the limitations set forth herein, Manufacturer warrants that the Products

manufactured by it in its Northford, Connecticut facility and sold by it to its authorized Distributors shall be free,
under normal use and service, from defects in material and workmanship for a period of thirty six months (36)
months from the date of manufacture (effective Jan. 1, 2009). The Products manufactured and sold by
Manufacturer are date stamped at the time of production. Manufacturer does not warrant Products that are not
manufactured by it in its Northford, Connecticut facility but assigns to its Distributor, to extent possible, any
warranty offered by the manufacturer of such product. This warranty shall be void if a Product is altered, service
repaired by anyone other than Manufacturer or its authorized Distributors. This warranty shall also be void if
there is a failure to maintain the Products and the systems in which they operate in proper working conditions.

MANUFACTURER MAKES NO FURTHER WARRANTIES, AND DISCLAIMS ANY AND ALL OTHER
WARRANTIES, EITHER EXPRESSED OR IMPLIED, WITH RESPECT TO THE
PRODUCTS,TRADEMARKS, PROGRAMS AND SERVICES RENDERED BY MANUFACTURER
INCLUDING WITHOUT LIMITATION, INFRINGEMENT, TITLE, MERCHANTABILITY, OR FITNESS
FOR ANY PARTICULAR PURPOSE. MANUFACTURER SHALL NOT BE LIABLE FOR ANY PERSONAL
INJURY OR DEATH WHICH MAY ARISE IN THE COURSE OF, OR AS A RESULT OF, PERSONAL,
COMMERCIAL OR INDUSTRIAL USES OF ITS PRODUCTS.

This document constitutes the only warranty made by Manufacturer with respect to its products and replaces all
previous warranties and is the only warranty made by Manufacturer. No increase or alteration, written or verbal,
of the obligation of this warranty is authorized. Manufacturer does not represent that its products will prevent any
loss by fire or otherwise.

Warranty Claims.

Manufacturer shall replace or repair, at Manufacturer's discretion, each part returned by its

authorized Distributor and acknowledged by Manufacturer to be defective, provided that such part shall have
been returned to Manufacturer with all charges prepaid and the authorized Distributor has completed
Manufacturer's Return Material Authorization form. The replacement part shall come from Manufacturer's stock
and may be new or refurbished. THE FOREGOING IS DISTRIBUTOR'S SOLE AND EXCLUSIVE REMEDY
IN THE EVENT OF A WARRANTY CLAIM.

Warn-HL-08-2009.fm

«
...
46
47
48
49
50
»

Содержание Farenhyt RPS-1000



















































Отзывы:

Нет отзывов

Похожие инструкции для Farenhyt RPS-1000

Бренд: Transcension Страницы: 20

Бренд: Tripp Lite Страницы: 24

Бренд: Tripp Lite Страницы: 36

Бренд: Tripp Lite Страницы: 48

LIEBERT MPX BRM

Бренд: Vertiv Страницы: 2

Бренд: Panamax Страницы: 16

Бренд: DINA Elektronik Страницы: 20

Бренд: Schaudt Страницы: 16

Бренд: Panamax Страницы: 11

Бренд: StarTech.com Страницы: 2

Бренд: Panduit Страницы: 2

Бренд: vollara Страницы: 4

Бренд: Intellinet Страницы: 2

Бренд: Intellinet Страницы: 2

Бренд: Intellinet Страницы: 2

Бренд: ITech Страницы: 77

Бренд: Crestron Страницы: 48

Juice Mobile Power

Бренд: Bretford Страницы: 10

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды