Honeywell ETCS Скачать руководство пользователя страница 6

Страница: 6 / 48

Ethernet Touch Call Station (ETCS)

FB 798685.GB0 / 03.20



Status indicators

Four LED indicate device status:

•

Power supply status (3.1)

•

System/microphone error (3.2)

•

Main connection status (3.3)

•

Backup connection status (3.4)

3.1

Off: no operating voltage

Green permanently lit: Operating voltage available, device active

3.2

Off: The microphone is good for use and no error displays

Yellow permanently lit:

The ETCS has errors other than a microphone error or a Network device (DOM / Comprio)

has an error. The common fault LED of DOM is yellow/flashing yellow. Detailed fault

information can be called up via the display.

Yellow flashing:

There is a microphone error. Microphone is not ready for operation!

the CPU is overloaded and the display "CPU overload" appears (displayed prior to a system

error). By deleting some active announcements from the "queue" in the display, the CPU

overload message is usually cancelled. If this fault message continues to be displayed, the

performance of ETCS may be affected.

3.3

Off

Missing connection cables and working in standalone mode

3.4

Off

3.3

Off

The device is ready for use.

(The MAIN output is active without a BACKUP connection cable.)

3.4

Green permanently lit

3.3

Green permanently lit

The device is ready for use.

(The BACKUP output is active without a MAIN connection cable.)

3.4

Off

3.3

Green permanently lit

The device is ready for use.

(MAIN output is active, and BACKUP output deactivates in stand by.)

3.4

Green permanently lit



Loudspeakers

e.g.

for listening to stored messages or intercom conversations (two-way intercom)



Display as 7" / 17,78 cm-touchscreen

Содержание ETCS

















































Результаты поиска

Содержание ETCS

Отзывы:

Похожие инструкции для ETCS

Бренды по названию

Популярные бренды

Honeywell ETCS, Инструкция по эксплуатации

Результаты поиска

Содержание ETCS

Отзывы:

Похожие инструкции для ETCS

Бренды по названию

Популярные бренды