Honeywell Domonial CME Series, Руководство по установке

Страница: 5 / 52

Page 5 of 52
02/2011
E
N
G
L
I
S
H
Introduction
Domonial is a wireless control panel with a built-in siren, digital communicator and audio
verification system. The radio link between the various components of the system allows easy
installation with only a small amount of cabling (mains, and when specified, PSTN, X10 or a wired
intercom terminal). This version can be used with the HF and the M wireless device ranges, for
example DO800M.
After recording a wireless Audio device, all HF wireless device can not work your installation.
Domonial can be programmed using the following tools:

DOMOPC programming tool. Refer to the DOMOPC online help guide for full details.

A TCU keypad
This guide describes how to program the panel using a TCU keypad. A complete list of
programming codes is provided at the end of this manual.
Panel Label
Commercial reference
Product file reference
Serial number
Note: The format of
Date of manufacture date is yymmdd
The software version number is marked on a label on the box containing the panel (e.g. SW: L06) and
on a small label on the PCB.
The LED Indicators
The panel comes in two designs, depending on the version. Both designs have LED indicator lights
showing the status of the system.
LED latout for the classic version
State/LED Mains Supply Arm/Disarm Perimeter
Fault Intruder Alarm
Memory Technical
Alarm Memory
Colour Green Green Yellow Red Red
LED latout for the EN version
State/LED Mains Supply Fault Area System Fault Tamper Fault Intruder Fault
Colour Green Green Yellow Red Red
CMI8UK-STD-7
97AGC0B
75000C6C8
100320