Honeywell Domonial CME Series, Руководство по установке

Страница: 24 / 52

Page 24 of 52
02/2011
E
N
G
L
I
S
H
30-Arming and disarming
All delays are expressed in seconds.
Total Set Partial Set Annex Set All Sets
Entry delay 3013 331 126 3113 341 128 3213 024 231 128 30 secs
Entry beeps 3012 331 220 3112 341 222 3212 024 231 225 30 secs
Exit delay 3023 332 223 3123 342 121 3223 024 232 221 60 secs
Exit beeps 3022 332 327 3122 342 225 3222 024 232 328 56 secs
Delay behaviour is determined by the following attributes:
Annex linked to total on arming 3301 024 328 0 = Independent 1 = Armed with total 0
Annex linked to total on disarming* 3302 024 922 0 = Independent 1 = Disarmed with total 0
Arm if perimeter open 3303 0251 120 0 = Allowed 1 = Forbidden 0
* Software version I12 or higher
40-Audio signals
Chime 4001 02532 621 0 = Disabled 1 = Enabled 1
50-Alarm Confirmation
Alarm Confirmation 5001 0252 324 0 = No 1 = Yes 0
51-Restoring
To perform an engineer reset, type in code 0258 152 199, then enter extra parameter 0.
Tamper reset 5101 0251 320 0 = Automatic, 1 = By Engineer 0
Reset with anticode (system lock) 5102 02301 0121 Enabled = 1, Disabled = 0 0
Algorithm key for anticode 5103 02301 0325 0 to 255 0
70-Transmission
Transmitter 7001 1129
0 = Inactive
1 = PSTN 2 = GSM/Ethernet Module
3 = PSTN+GSM/Ethernet Module 0
PSTN Prefix 7103 13146 Up to 17 characters (“+” should be replaced by “00”) -
GSM PIN Code 7204 14148 4 digits 0000
APN #1 7211 14415 Up to 30 characters -
APN #1 Login 7212 14518 Up to 20 characters -
APN #1 Password 7213 14611 Up to 20 characters -
APN #2 7221 14817 Up to 30 characters -
APN #2 Login 7222 14910 Up to 20 characters -
APN #2 Password 7223 140 1019 Up to 20 characters -
Alarm sent if Partial set 7002 025 529 0 = not sent 1 = sent 0