Honeywell Domonial CME Series, Руководство по установке

Страница: 13 / 52

Page 13 of 52
02/2011
E
N
G
L
I
S
H
Mount, register and programme devices
Take each wireless device in turn to its mounting position, together with the TCU, and then carry
out the following procedure for each one.
1. Mount the device according to the device's documentation. Do not add the battery
at this time.
2. Press
twice to return to the programming submenu,
ensure REGISTER is highlighted, and then press .
The word REGISTERING is displayed on the screen.
3. Insert the battery in the device, according to the device instructions.
4. Press the tamper on the device (check the device
instructions, some devices may not have a tamper). The
serial number, type and radio level are displayed on the TCU.
5. Check the radio level. It should be greater than 3 for devices,
and greater than 4 for audio wireless devices.
6. Place the cover on the device, or place the device on its
socket (refer to the device instructions).
7. Press to display the MODIFY DEVICE menu. Although it
is optional, we recommend you complete the next step and
apply a meaningful label to the device.
8. Press to select LABEL. Press several times to
remove the default label, type a new label, and then
press
.
This completes the basic registration of a device, however you can also set the following:

On the MODIFY DEVICE menu, select EDIT to change the device default settings to meet your
system's particular requirements. A list of codes is provided at the end of this manual.

On the MODIFY DEVICE menu, select CHANNEL to change the channel number. This is not
recommended unless specified by your alarm service supplier. By default, channel numbers
are assigned automatically when a device is registered.
Repeat this procedure, as necessary, for all devices in the system.