Honeywell Dolphin CT40, Руководство пользователя

Страница: 54 / 120

44 CT40/CT40 XP Mobile Computer Series User Guide
Imager Settings
You should not need to modify the Imager Settings. The Override Recommended
Values setting is disabled by default. The recommended Imager Settings are
designed to work in a wide range of environments and should only be modified if
you have an advanced understanding of imagers.
Trigger Settings
Use the Trigger Settings to configure how the scan buttons work.
Trigger Settings
Preferred
Symbology
Settings Set the priority level (High or Low) for symbology codes. This is
used when you want to specify one symbology as a higher priority
over other symbologies in situations where both barcode
symbologies appear on the same label, but the lower priority
symbology cannot be disabled. If a code is set as a High Priority,
the decode of that symbology is accepted immediately. If a code is
set as a Low Priority, the decode is buffered to see if a decode of a
preferred High Priority symbology can be found within a given
timeout period.
To apply Preferred Symbology Settings, tap the check box.
Preferred Timeout (ms) - The amount of time milliseconds that will
allow the scanner to search for a High Priority barcode after a Low
Priority barcode has been encountered. The default is 500ms.
To set the priority level for a symbology, tap the code in the list then
select the priority. The default for all codes is “High Priority.”
Disabled
Setting Description Default
Setting Description Default
Enable Scan
Trigger Enable or Disable activating the imager by pressing the side scan
buttons or the virtual Scan button in the Scan Demo app. Enabled
Scan delay Set the minimum amount of time in seconds before the scanner
can read another barcode. 0
Decode Timeout Set the number of seconds before the scanner automatically turns
off if the scan button is pressed and nothing has successfully
decoded. 20
Trigger Scan
Mode Set read behavior on scan button press.
Options available:
• One Shot
• Continuous
• Read on release
• Read on second trigger press
One
Shot