Honeywell DirectLine DL423 Скачать руководство пользователя страница 2 | Manualshive

Страница: 2 / 36

Honeywell DirectLine DL423 Скачать руководство пользователя страница 2

Notices and Trademarks

Copyright 2011 by Honeywell

September, 2011

Warranty/Remedy

Honeywell warrants goods of its manufacture as being free of defective materials and faulty
workmanship. Contact your local sales office for warranty information. If warranted goods are
returned to Honeywell during the period of coverage, Honeywell will repair or replace without
charge those items it finds defective. The foregoing is Buyer's sole remedy and is

in lieu of all

other warranties, expressed or implied, including those of merchantability and fitness for a
particular purpose

. Specifications may change without notice. The information we supply is

believed to be accurate and reliable as of this printing. However, we assume no responsibility for
its use.

While we provide application assistance personally, through our literature and the Honeywell
web site, it is up to the customer to determine the suitability of the product in the application.

CE Conformity

This product is in conformance with the protection requirements of the following European
Council Directives: 89/336/EEC, the Electromagnetic Compatibility Directive and 73/23/EEC,
the Low Voltage Directive. Conformance of this product with any other “CE Mark” Directive(s)
shall not be assumed.

ATTENTION

The emission limits of EN 61326 are designed to provide reasonable protection against harmful
interference when this equipment is operated in an industrial environment. Operation of this
equipment in a residential area may cause harmful interference. This equipment generates, uses
and can radiate radio frequency energy and may cause interference to radio and television
reception when the equipment is used closer than 30 m to the antenna(e). In special cases, when
highly susceptible apparatus is used in close proximity, the user may have to employ additional
mitigating measures to further reduce the electromagnetic emissions of this equipment.

Honeywell Process Solutions

Honeywell

512 Virginia Drive

Fort Washington, PA 19034

DirectLine is a trademark of Honeywell

Other brands or product names are trademarks of their respective owners

ii

DirectLine® DL423 Sensor Module User Manual

9/11

«
1
2
3
4
...
»

Содержание DirectLine DL423





































Отзывы:

Нет отзывов