Honeywell DirectLine DL423, Руководство пользователя, Страница: 10 / 36

Introduction
4 DirectLine® DL423 Sensor Module User Manual 9/11
1.5 Model Selection Guide
Instructions
Select the desired key number. The arrow to the right marks the selection available.
Make the desired selections from Tables I through IV using the column below the
proper arrow.
A dot ( ) denotes availability.
Key Number I II III IV
_ _ _ _ _ - _ - _
-
_ -
Key Number - DirectLine
®
Sensor Electronics Module
(Specify electrodes/cells/probes separately)
Selection
pH For use with Durafet II, Meredian II & HPW7000 pH electrodes DL421
ORP For use with ORP electrode. DL422
Conductivity For use with Contacting Conductivity Cells DL423
DO - PPM For use with Dissolved Oxygen ppm Probes DL424
DO - PPB For use with Dissolved Oxygen ppb Probes
TABLE I - OUTPUT CABLE
Cordset - 6m (19.7 ft.) - includes connector and cable - Note 2
E
Field Wiring Connector only - customer supplies cable only- Note 2
TABLE II - SENSOR CABLE/REMOTE CONNECTOR (between electronic module and electrode, sensor or pro
0 d d d d d
6,096m (20 ft.) of sensor cable - Durafet II Remote Mounting 1 e
15,24m (50 ft.) of sensor cable - Durafet II Remote Mounting e
e
e
e
e
e e
TABLE III - REMOTE MOUNTING OPTIONS
None Integral unit - mounting not required A
2" (5,08 cm) Pipe mtg. bracket, wall mtg, & DIN Rail clip B
TABLE IV - OPTIONS
None
00 _ _
Linen Customer ID Tag - 3 lines w/22 characters/line LT _ _
SS Customer ID Tag - 3 lines w/22 character/line
SS _ _
Certificates
None
_ _ 00
Calibration & Conformance
_ _ CC
Mounting Kit for
Remote Mounting
None (replacement module or customer supplied output cable)- Note 1
D
Remote Mounting Connector - Meredian II ORP
Remote Mounting Connector - HPW7000
Remote Mounting Connector - Conductivity
Remote Mounting Connector - Dissolved Oxygen
DL425
2
Remote Mounting Connector - Meredian II pH
Remote Mounting
Connector (Cable is
supplied with sensor or
probe)
3
3
4
5
6
Integral Mounting
No cable or connector required
Remote Mounting Cable
- Durafet only
Availability
Output Cable for
Integral or Remote
Mounting
F
_ _ _ _
Tagging
Notes:
1 Customer supplies cordset or cable with M12 connecter. Suppliers & P/Ns include:
Phoenix Contact Turck
Cord--set SAC-3P-5.0-PUR/M12FSSH Stainless RKV4T-6/S618
M12 Field Wiring Connector
SACC-M12FS-4CON-PG7 B8141-0
Cable
2 Recommended cable is 2-wire twisted shielded pair
RESTRICTIONS
Table
d
e
ORDERING INSTRUCTIONS:
1. Part numbers are provided to facilitate Distributor Stock.
2. Orders may be placed either by model selection or by part number.
3. Part numbers are shown within the model selection tables to assist with compatibility information.
4. Orders placed by model selection are systematically protected against incompatibility.
5. Compatibility assessment is the responsibility of the purchaser for orders placed by part number.
6. Items labeled as N/A are not available via the stocking program and must be ordered by model selection.
III B
Available Only With Not Available With
IIl A
Selection Table
2-wire twisted shielded pair
Restriction
Letters
Selection