Honeywell CORE Drive, Быстрый старт

Страница: 19 / 24

HONEYWELL CORE DRIVE
19 62-0410—04
WARNING CODES
1
2
3
1
2
3
Display error signal
Abbreviated error code
Display error description
Table 13. Warning Codes
Warning
Code Keypad Display
Description
CE01 Comm. Error 1 Modbus function code error
CE02 Comm. Error 2 Address of Modbus data is error
CE03 Comm. Error 3 Modbus data error
CE04 Comm. Error 4 Modbus communication error
CE10 Comm. Error 10 Modbus transmission time-out
CP10 Keypad Time Out Keypad transmission time-out
SE1 Save Error 1 Keypad COPY error 1
SE2 Save Error 2 Keypad COPY error 2
SE3 Save Error 3 Keypad COPY error 3
oH1 Over heat 1 warn IGBT over-heating warning
oH2 Over heat 2 warn Capacity over-heating warning
PID PID FBK Error PID feedback error
ANL Analog loss ACI signal error
uC Under Current Low current
AUE Auto-Tune Error Auto tuning error
oSPD Over Speed Warn Over-speed warning
DAvE Deviation Warn Over speed deviation warning
PHL Phase Loss Warn Phase loss
ot1 Over Torque 1 Over torque 1
ot2 Over Torque 2 Over torque 2
oH3 Motor Over Heat Motor over-heating
oSL Over Slip Warn Over slip
tUn Auto Tuning Auto tuning processing
OPHL Output PHL Warn Output phase loss warning
Ecid ExCom ID failed Duplicate MAC ID error
ECLv ExCom pwr loss Low voltage of communication card
Ectt ExCom Test Mode Communication card in test mode
ECFF ExCom Facty def Factory default setting error
ECiF ExCom Inner err Serious internal error
Ecio ExCom IONet brk IO connection break off
ECEF ExCom Link fail Ethernet Link fail
Ecto ExCom Inr T-out Communication time-out for communication card and drive
ECCS ExCom Inr CRC Check sum error for Communication card and drive
ECrF ExCom Rtn def Communication card returns to default setting
ECo0 ExCom MTCP over Modbus TCP exceed maximum communication value
ECo1 ExCom EIP over EtherNet/IP exceed maximum communication value
ECiP ExCom IP fail IP fail
EC3F ExCom Mail fail Mail fail
Ecby ExCom Busy Communication card busy