manualshive.com logo in svg

Honeywell CORE Drive, Быстрый старт, Страница: 16 / 24

Поделиться
Скачать
Honeywell CORE Drive Скачать руководство пользователя страница 16

HONEYWELL CORE DRIVE

62-0410—04

16

RIGHT and LEFT arrows to move the cursor with a numeric parameter, or to enter into and out 

of menus.
UP and DOWN arrows used to change numeric parameter values, or cycle through menu 

options.

Function Keys - will have different functions at different times as displayed on the screen. Used 
during Wizard Mode.

Pressing the HAND key will take the VFD into Hand control, where the user can control the 
motor Frequency and START and STOP.

Pressing this key will revert the VFD to remote/Automatic control from a remote speed and start 
command source.

Table 9. Descriptions of Keypad Functions

F1

F2

F3

F4

HAND

AUTO

Table 10. Descriptions of LED Functions

LED

Descriptions

Steady ON: operation indicator for the VFD, including DC brake, zero speed, standby, restart 
after fault and speed search.

Blinking: VFD is decelerating to stop.

Steady OFF: VFD is not running.

Steady ON: VFD is stopped.

Blinking: VFD is in the standby status.

Steady OFF: VFD running.

Operation Direction LED (green: forward running, red: reverse running).

Blinking: drive is changing the operation direction.

HAND LED: When HAND LED is on (HAND mode); when HAND LED is off (AUTO mode). 

AUTO LED: When AUTO LED is on (AUTO mode); when AUTO LED is off (HAND mode).

RUN

STOP

RESET

REV

FWD

HAND

AUTO

Содержание CORE Drive

























Отзывы:

Нет отзывов